Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Machine-specific Safety Warnings
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Example:
Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip
extraction when connectable.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working. Damaged cables increase the risk of an
electric shock.
Connect machines that are used in the open
via a residual current device (RCD).
Wear hearing protection. Exposure to noise can
cause hearing loss.
Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or
may cause an electric shock.
Hold the power tool only by the insulated
gripping surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own power cord. Contact with
a "live" wire will also make exposed metal parts of
the power tool "live" and shock the operator.
GB
Functional Description
instructions. Failure to follow the warnings
Intended Use
The machine is intended for heavy chiselling and
demolition work as well as for driving in and
compacting with the appropriate accessories.
Technical Data
Rated power input
Output power
Impact rate
Impact energy per stroke 75 J
Tool holder
Weight
Protection class
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Handles
3 Tool retainer
4 Tool holder
5 Tool shank
The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured values determined according to EN
60745.
Typically the A-weighted noise level of the machine
is: sound pressure level 95 dB(A); sound power
level 106 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Read all safety warnings and all
and instructions may result in electric
shock, fire and/or serious injury.
2200 W
220-240 V~ 50Hz
950
tr/min
28X530 mm
32 kg
II
11
Publicité
Table des Matières
