Panasonic EY7880 Mode D'emploi page 11

2. Insert the battery pack firmly into the
charger.
3. During charging, the charging
lamp will be lit. When charging is
completed, an internal electron-
ic switch will automatically be trig-
gered to prevent overcharging.
• Charging will not start if the battery
pack is warm (for example, imme-
diately after heavy-duty operation).
The orange standby lamp will be
flashing until the battery cools down.
Charging will then begin automatically.
4. When charging is completed, the
charging lamp will start flashing
quickly in green color.
5. If the charging lamp does not light
immediately after the charger is
plugged in, or if after the standard
charging time the charging lamp
does not flash quickly in green, con-
sult an authorized service center.
6. If a fully charged battery pack is in-
serted into the charger again, the
charging lamp lights up. After sev-
eral minutes, the charging lamp
may flash quickly to indicate the
charging is completed.
- 11 -