Care & Maintenance - Xiaomi Mi Air Purifier 3C Manuel D'utilisation

Care & Maintenance
Make sure to turn off the air purifier and disconnect power before cleaning.
Cleaning the air purifier
To ensure your purifier works and
purifies properly, use a vacuum
cleaner or soft cloth to remove
any dust clinging to air holes or
housing walls.
Cleaning the laser particle
sensor
Use a non-sharp tool to open the
cover of the laser particle sensor,
then use an air blow gun or hair
dryer to clean the sensor and the
filter on the cover, as illustrated
in the figure.
Note: Do not use hot air.
The filter in the filter
compartment can be cleaned
with water, please reinstall it
after it is thoroughly dry.
Note: It is forbidden to directly rinse
or spray the purifier with water. Do not
wipe the purifier with a soaking wet
cloth to prevent water from getting
into it.
7