Monacor security TVLCD-720COL Mode D'emploi page 9

The following values for brightness, colour intensity
and contrast are defined for the image adjustments:
Image adjustment
STANDARD
SOFT
VIVID
LIGHT
MEMORY
When changing the image parameters – via the
arrow buttons (10) or the menu – the monitor will go
MEMORY
to and accept the values changed under
this adjustment. The individual values are, however,
MEMORY
reset by the preset
monitor is switched to another image adjustment
with the button P.P.
5) Use the button SYS (13) to switch over to mirror
image mode. When the button is pressed for the
first time, the present display mode is inserted.
Each time the button is pressed, the monitor will be
switched to the next display mode:
R
R
no mirror image
mirror image up / down
6) The monitor has an on-screen menu which con-
sists of several menu items. Each time the button
MENU (3) on the monitor is pressed, the next menu
item will be selected and, when the last menu item
is reached, the menu will be exited. The adjust-
ments of a menu item can be changed with the but-
tons + and - (5) on the monitor.
Note: If the button + or - is pressed when no menu item
is activated, a scale for volume adjustment will appear for
a few seconds. However, this function is not available as
no audio reproduction is provided for the monitor.
To make adjustments, press the buttons succes-
sively without delay as the menu will disappear
shortly after the last button has been pressed.
Order of the menu items:
1. BRIGHT
2. CONTRAST
3. COLOR
The image parameters brightness, contrast and
colour intensity can be changed via the first
three menu items: increase the corresponding
value with the button + or decrease it with the
button -.
4. ZOOM
Switch between the image sizes "16 : 9" and
"4 : 3" with the button + or -.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
Values
COL
50 50 50
40 50 40
60 70 60
70 70 70
70 70 70
values as soon as the
R
mirror image rotation
left / right 180°
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
5. SIGNAL
Switch between the video sources "AV1" and
"AV2" with the button + or -.
6. LANG.
Switch to the desired menu language with the
button + or -. The following menu languages are
available: English, German, French, Spanish,
Portuguese, Italian, Dutch, Russian and Chi-
nese.
8 Specifications
Diagonal screen size: . 17.8 cm (7")
Colour system: . . . . . . PAL/NTSC
Resolution: . . . . . . . . . hor. 800 × vert. 480 pixels
Video inputs: . . . . . . . 1 Vpp/75 Ω
Connections
Video: . . . . . . . . . . . via adapter cable provided
Power supply: . . . . . jack for a hollow plug of the
Ambient temperature: . 0 – 40 °C
Power supply: . . . . . . . 12 V /250 mA
Dimensions, weight: . . 185 × 120 × 27 mm, 750 g
Subject to technical modification.
(automatic switching)
(3.5 mm plug to 2 × RCA plug)
dimensions 3.5/1.35 mm
(∅ outside/inside), internal
contact = positive pole
via power supply unit pro-
vided or the vehicleʼs elec -
trical system
GB
9