Lonworks Communication; Ethernet Communication - IME Nemo 96 HDLe Manuel D'installation

Nemo 96 HDLe
Rogowski
IF96009 module LonWorks communication
It makes available by LonWorks communication the main data concerning carried out
measurements as well as configuration parameters (
In the models with built-in RS485 communication it allows to have an additional
LonWorks communication output (configuration Software available on the website
www.imeitaly.com).
Transceiver: FTT10
TTENTION!
Before connecting LonWorks module please check
that the communication parameters are set as
follows:
N° address: 255
Transmission speed: 9.600 bit/s
Parity bit: none
30
For details, please see the communication protocol)
S 1000/296
LonWorks
1 2
LonWorks
IF96015 module ETHERNET communication
It makes available by ETHERNET communication the main data concerning carried out
. measurements as well as configuration parameters (
. In the models with built-in RS485 communication it allows to have an additional
protocol)
ETHERNET communication output (configuration Software available on the website
www.imeitaly.com).
Standard: IEEE802.3
Transmission: max.10Mb/s
PROGR MM BLE P R METERS
IP address
Subnet
Gateway
TCP Port
TCP Timeout
For details, please see the communication
S 1000/382
ETHERNET
ETHERNET
IF96015
ETHERNET MODULE
00:50:C2:71:D6:F8
MADE IN ITALY
M C address
02/18 E04 10783304 WEB E cod.MF96421SR
11 52
1234567890