5-Steps To Access To The Turnbuckle - Facnor EF+550-600 Mode D'emploi

Important :
Do not forget to connect the pins
5 and 2 if you are in 12 volts
5 et 3 if you are in 24 volts
5- STEPS TO ACCESS TO THE TURNBUCKLE
Drive unit supplied with 5.80m long wires
code /part No document: 29160050073 - indice A – page 28/29
1. Remove the 4 screws from the bottom
part and link plates
2. Remove the feeder screw
3. Lift up the electric unit