Maintenance And Cleaning - Berner BACC-36V LI Instructions D'emploi

BACC-36V LI.book Seite 3 Montag, 10. Juli 2006 10:36 10

Maintenance and Cleaning

The unit is is maintenance-free. Always keep the
unit and the ventilation slots clean.
If the unit should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an after-sales service
agent for Berner power tools.
In all correspondence and spare parts orders,
please always include the 6-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power
tools that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental-friendly manner.
Subject to change without notice
To be fitted
by qualified
professional only
English - 3