Main Menu Parameters - Maytronics Wave 300 XL Instructions Pour L'utilisateur

Defining the robot's parameters:
1. Switch on the power supply. The MMI Wave
screen opens in the home window.
2. Press menu to enter the Main Menu
(Figure 6).
Clock Setup
Date Setup
Error Report
Language
Select
figure 7: Second main menu screen

main menu Parameters

The parameters that can be accessed from the Main Menu screen are explained in the table below:
Parameter
Pool Profile
Filter State
Technician
Mode
Statistics
Second main menu screen parameters
Parameter
Clock Setup
Date Setup
Error Report
Language
8
-8151450_WAVE300XL_BOOK.indb 8
Main Menu
English
Exit
Description
Press Select to go to the Pool Profile screen.
The Pool Profile opens the Pool Profile screen and displays the 4 different
Pool Profiles configured.
Pool A is the default setting.
Reports on the filter's condition.
• Clean: Filter bag is ready for use
• full: Change/clean filter bag
The filter bag warning light on the console will also indicate that the filter bag
needs cleaning.
Technician screen with restricted access.
Press Select to review data on robot's usage.
Description
Press Select to enter the Clock Setup screen and 12/24 hour mode.
Press Select to enter the Date setup screen.
Displays information for service technicians.
Language interface mode.
Main Menu
Pool Profile
Filter State
Technician Mode
Statistics
Select
figure 6: main menu screen
There are 2 Main Menu screens and you access the
second screen by pressing the scroll down arrow
After "Statistics", scroll down to the second Main
Menu screen (Figure 7).
Wave XL
Clean
Exit
.

| User Instructions
1/27/14 2:48 PM