Customer Service; Replacing The Led Lights - Siemens LB53NAA30 Mode D'emploi

Customer service

en

Replacing the LED lights

:
Warning – Risk of electric shock!
When changing the bulbs, the bulb socket contacts are
live. Before changing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in the
fuse box.
:
Warning – Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than
100 seconds.
Important! Only use bulbs of the same type and
wattage.
Loosen and remove the bulb cover.
1.
Unscrew the bulb and replace it with a bulb of the
2.
same type.
Refit the bulb cover.
3.
Plug in the mains plug and switch the circuit breaker
4.
back on.
18
4Customer service
W hen calling us, please give the product number (E
C u s t o m e r s e r v i c e
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
E no.
After-sales serviceO
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
0344 892 8999
GB
Calls charged at local or mobile rate.
01450 2655
IE
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
FD no.