Technical Specifications; Operating Conditions - EZA COMB-E Guide D'utilisation

TECHNICAL SPÉCIFICATIONS
Dimensions : 48 L x 39 l x 24 H (cm)
Weight : 29kg
Operating temperatures : 23–111 °F (-5–45 °C)

Operating conditions :

• Keep out of rainy, damp, or snowy conditions.
• When charging outside with a solar panel, use the panel to shade the unit for better charging
efficiency.
• Do not store in a hot vehicle for extended periods of time (i.e. anything over 5 hours).
Battery :
• Lithium Iron Phosphate (LFP)
• 100Ah (1280Wh) capacity
• 12.8V capacity
• Rated for 2,500+ charge and discharge cycles
• Minimum charge time: 3 hours
• Charge retention: 1 year (85%)
• Integrated inverter: 230V AC pure sine wave; 1,500W continuous output, slow-start feature
protects the inverter from over-current draw
• Maximum of 40A @ 12V charging current from DC input & 20A from AC
• Maximum AC current pulled from AC source (e.g. a wall outlet): 4A @ 230V AC
• Maximum combined charge from AC and DC circuitry: 40A @ 12V DC
• Max DC output current: 20A
• Prismatic cell geometry
Unit Body :
• Steel case
• Cooled by back-mounted fan
LCD Display :
6-bar battery-shaped gauge
- Connect with your owned 12V battery
- Displays wattage used while the AC switch is on for easy run time calculations. Will remain at
zero when AC switch is in OFF position
Power controls :
• Power key on front panel
• AC power ON/OFF switch on front of unit
Inputs Ports :
• AC: 220-240V, 50–60Hz
• DC: Anderson Powerpole connector ports; 1 set, total of 40A limit using 12V input (solar panel
voltage 12-24V), the unit with a MPPT controller inside
Outputs Ports :
• AC: 220-240V, 50Hz–60Hz; 2 outlets share a combined total current limit of 1,500W,
including a slow-start feature that protects the inverter from over-current draw
• DC: 4 USB outlets, 2.1A max
• DC: Anderson Powerpole connectors; 1 set with a total shared current limit of 20A @ 12VDC
(240W max output)
• DC: 12V cigarette lighter adapter capable of 10A (120W) max output