EZA COMB-E Guide D'utilisation page 27

DC Usage Outlets
WARNING
Never use a damaged or frayed DC cord; electrical shock can occur if DC cord is damaged
or frayed. If DC cord is damaged, replace with a new cord before proceeding with DC usage
1. How you use the DC
Anderson Powerpole outlets (see photo) depends on the amperage of your chosen load. For
loads between 0 and 20 amps, you will need an Anderson Powerpole extension cord. First, plug
the extension cord into the desired device. Then, plug the other end of the extension cord into the
Anderson Powerpole outlets on the front of the system (plug black into black and red into red). Do
not use an Anderson Powerpole extension cable for loads greater than 20 amps. For loads
greater than 15 amps but less than the 20-amp max, plug the device directly into the Anderson
Powerpole outlets.
2. To use the DC cigarette outlet (see photo), simply plug in any 12-volt device that is rated for
a maximum of 10 amps and operate as normal.
Please check with your device manufacturer for proper power requirements and compatibility.
DC USB Outlets
To use your USB outlets, first plug the
device you want to use into the
appropriate out lets– 2.1A for cell
phones (see photo) and 2.1A for tablets.