EZA COMB-E Guide D'utilisation page 26

AC Usage Outlets
AC OUTLETS
WARNING
Never use a damaged or frayed AC cord; electrical shock can occur if AC cord is
damaged or frayed. If AC cord is damaged, replace with a new cord before
proceeding with AC usage.
1. To use your AC outlets, plug in the devices you want to run. Then turn on the inverter by
switching the main AC power switch (see photo) to the ON position. Once on, the outlets will work
like normal AC wall outlets in your home.
2. In order to protect the inverter and battery, any sustained discharge over 1500w will cause the
unit to shut down. It can subsequently be reset.
3. The watt meter, found on the bottom row of the LCD display, shows the amount of energy
being used by the inverter. Please note this energy output is estimation, and actual output may
vary from displayed values.
4. Because the watt meter measures inverter output, it will show wattage only for loads plugged
into the AC output ports. This meter will never display energy output from DC ports.
5. The watt meter cannot detect loads accurately under 25 watts and will display 0 watts for loads
under 10 watts.