Troubleshooting - AKG D40 Mode D'emploi

5 Troubleshooting

Problem
No sound.
22
Possible Cause
1. Power to mixer and/or
amplifier is off.
2. Channel or master fader
on mixer, or volume
control on amplifier is at
zero.
3. Microphone is not con-
nected to mixer or am-
plifier.
4. Cable connectors are
seated loosely.
5. Cable is defective.
Remedy
1. Switch power to mixer
or amplifier on.
2. Set channel or master
fader on mixer or vo-
lume control on ampli-
fier to desired level.
3. Connect microphone to
mixer or amplifier.
4. Check cable connectors
for secure seat.
5. Check cable and re-
place if damaged.
D 40