Kibernetik Nanyo 35AA Mode D'emploi page 32

OPERATING MANUAL | Air Conditioner Nanyo 35AA
Ionizer function (optional)
This is only for the model with Ionizer function, i.e. model no. with I.
To start the ionizer function, please press IONIZER button, this function can push away the
dust and large particles in the air.
Self-diagnosis
This machine is equipped with self-diagnosis function. If something is wrong in the
machine, the LCD will show the word "E1" or "E2". As this time, please call your service
centre.
All the above functions can also be performed with the supplied remote control. (fig. 18)
This remote control requires 2 pcs AAA batteries to operate.
Efficiency boosting (Fig. 19)
This unit is equipped with "energy efficiency boosting" function, by adding the water to the
water tank as below, the energy efficiency can be boosted, save energy for the earth, save
money for you.
1. Open the door for the water tank
2. Take out the water tank
3. Unscrew the tap for the tank and fill up the tank with clean Water
Notice!
This efficiency feature by adding water is proposed to do after one hour operation.
Notice!
1. To prolong the compressor's life, after switch-off of the unit, please wait for 3 minutes
(at least) before re-switch.
2. The cooling system will switch off if the ambient temperature is lower than the set
one. The ventilation, however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
3. On the contrary, the heating will switch off if the ambient temperature is higher than
the set one (still, the ventilation keeps working on the set level). As the ambient
temperature drops below the selected level, the heating will return to work.
4. This machine is equipped with ANTI-FROST function. While using the heating
function during low temperature, sometimes the heating will stop for a while in order
to melt the frost. As this occurs, just wait for the heating returns to work.
32