Kibernetik Nanyo 35AA Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Setting temperature
1.
Press 'Temperature up' or 'Temperature down' button to regulate the temperature you
desired.
2.
The display window will show the temperature you set as you press 'Temperature up'
or 'Temperature down' button. Otherwise, it will always show the ambient
temperature.
3.
The pre-setting temperature of this machine is: 24°C for cooling, 20°C for heating.
Setting ventilation speed
Press SPEED button to choose the ventilation speed you need, high or low. The sign of
high or low ventilation will light on at the same time.
Setting timer
1.
Press TIMER button to set the operating hours you desired (1 to 24 hours, the sign of
timer will light on). When the set time has been reached, the machine will turn off
automatically. The display window will show the hour(s) you set as you press TIMER
button. If the timer button is not pressed, the unit will work continuously.
2.
By pressing the timer but without turning on the other functions, you can PRE-SET
the time for the machine to work. For example, if you press the timer to '2', the unit
will work automatically after 2 hours.
Sleep function
1.
In cooling mode, by pressing the SLEEP button, the set temperature will increase 1°C
at the 1st hour, another 1°C at the second hour, then keeps at that temperature.
2.
In heat mode, by pressing the SLEEP button, the set temperature will descend 1°C at
the 1st hour, another 1°C at the second hour, then keeps at that temperature.
3.
In sleep mode, the ventilation will keep at low speed. Repress the SLEEP button, the
setting temperature and ventilation speed will return to the pre-selected one.
4.
The unit will shut down automatically after the SLEEP function running for 12 hours.
5.
Please note, the sleep function is not available while the machine is working in
ventilation, dehumidification or auto mode. Only available in Cooling or Heating
mode.
6.
When the machine is in Sleeping function, the Fan Speed would turn to be LOW
speed.
OPERATING MANUAL | Air Conditioner Nanyo 35AA
31

Publicité

Table des Matières
loading

Table des Matières