Cleaning And Care; Outer Surfaces; Inner Surfaces; For Transportation - Beko MOC 20100 W Mode D'emploi

5

Cleaning and Care

Unplug your oven before cleaning.
*
Do not use abrasive cleaners, steel wools, rough
*
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your
microwave oven.

Outer surfaces

To clean the outer surfaces of the oven, first
*
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
Do not allow water ingress into the ventilation
*
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
Do not use cleaning sprays or more soap and
*
water. They may cause problems in control mec-
hanism.

Inner surfaces

To clean the inner surfaces of the oven:
To soften the dried stains, put a glass of water
*
and boil for 2-3 minutes.
Clean the inner surfaces and ceiling with a soft
*
and soapy cloth. And dry again with a soft cloth.
To remove the odours inside the oven, boil a
*
mixture of water and a few table spoons of
lemon juice for a couple of minutes inside the
oven.
Microwave Oven / User Manual
To clean the inner base of the oven, remove the
*
roller glass tray and roller support. Wash the rol-
ler glass tray and roller support in soapy water.
Then, rinse and dry them.
Before starting the oven, install the roller
*
support and glass tray securely.
When cleaning the inner surfaces of the oven
*
door, use a non-abrasive soft sponge or cloth.

For transportation;

Unplug the appliance.
*
Pack the glass tray in a way to prevent them
*
from breaking and moving inside the oven.
Transport it separately if needed.
Tape the front door to the body.
*
Prevent impact against the front glass, door and
*
panel.
Transport the product in normal position. Do not
*
lean it aside or back.
21 / 331 EN