Jennair W10918236C Guide D'utilisation Et D'entretien page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
4. Max Ice
The Max Ice Setting increases
the freezer cooling capacity
improving the ice making
rate.
Ice Maker Off
To turn the ice maker off,
touch ICE MAKER OFF.
5. Connect
Wi-Fi connectivity allows your
Smart Freezer to connect
to the Internet and interact
with the JennAir
your smartphone or mobile device. See the
"Automatic Setup—Wi-Fi Protected Setup
(WPS)" section for more information.
Sabbath
Allows the door of the freezer
to be opened or closed
during the Sabbath or other
religious holidays without
activating the interior lights or controls.
Press and hold Sabbath for 3 seconds to
activate Sabbath mode.
Lock
The dispenser can be locked
for easy cleaning or to avoid
unintentional dispensing.
6. Power Outage
been off and the freezer temperature has
risen.
Over temp Alarm
freezer temperatures remain at unusually
high levels.
Door Open
App from
®
and cooling is turned on. The alarm will
repeat every 2 minutes. Close the door to
turn the alarm and "Door Open" alert off. To
stop the alarm noise with the door open,
press any key.
7. Showroom
deactivate all other functions except interior
lighting.
To activate showroom mode, press
and hold top and bottom zone icons
simultaneously for 3 seconds.
To deactivate the showroom mode,
press and hold top and bottom zone
icons simultaneously for 3 seconds.
The Power Outage indicator
lets you know if the power
supply to the freezer has
Helps avoid food spoilage
and high energy costs by
sounding an alert when
The Door Open alarm feature
sounds an alarm when the
refrigerator door(s) or freezer
door is open for 5 minutes
This mode is used when the
freezer is on display in a retail
store or if you want to turn
the cooling off and
8. Filter Reset
Displays the status of the
water filter. To reset the
filter, press and hold FILTER
RESET for 3 seconds. After
countdown, the "Replace Filter" indicator
will turn off.
Replace Filter
Replace the water filter.
While you are dispensing
water, the "Replace Filter"
icon will flash constantly from
beginning to the end of dispensing. After 14
days without replacing the water filter, the
"Replace Filter" icon will blink seven times
and an alert tone will sound three times
at the end of dispensing. See the "Water
Filtration System" section.
NOTE: "Replace Filter" will remain
illuminated if a filter reset is not completed.
Order Filter
Order a replacement water
filter.
INTRODUCTION | 11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

P9wb2lP9rfwb2lEdr2rxd1

Table des Matières