Using The Timer; Setting The Clock; Changing The Clock's Display Mode - Pioneer XW-NAC3-K Mode D'emploi

08

Using the timer

Chapter 8:
Using the timer

Setting the clock

Setting the clock allows you to use the timer.
1 With the power turned ON, press
The current time and day are displayed.
• If the clock is not set, the Timer Setup screen
will be displayed. Proceed with Step 3.
2 Press again.
The Timer Setup screen is displayed.
Use / to select 'Clock Adjust', then
3
press ENTER.
The Clock Adjust screen is displayed.
Use / to set the day, then press
4
ENTER.
Use / to set the hour, then press
5
ENTER.
Use / to set the minute, then press
6
ENTER.
When the setting is completed, the newly set
value displays for 2 seconds.
Note
1 You'll need to set the clock again if you unplug the unit (or in case of a power failure).
36
En

Changing the clock's display mode

You can choose to display the clock in 12-hour
mode or 24-hour mode.
1
• Default setting: 12H (12-hour mode)
1 With the power turned ON, press
The current time and day are displayed.
2 Press
The Timer Setup screen is displayed.
Use / to select 'Hour Display', then
3
press ENTER.
The Hour Display screen is displayed.
.
Use / to select '12H' or '24H', then
4
press ENTER.
When the setting is completed, the newly set
value flashes for 2 seconds.
again.
.