Advanced Bionics Naída CI M30 Mode D'emploi page 32

2. Power on the Naída CI M30 sound processor by
connecting the sound processor to a power source.
The sound processor will be discoverable by your
Bluetooth-enabled device for up to three minutes,
or until it is successfully paired to a device.
3. Your device should show a list of Bluetooth-enabled
devices. Select the sound processor from the list to
pair your sound processor. If you use two Naída CI
M30 sound processors, selecting one sound processor
for pairing will simultaneously pair both sound
processors. A beep confirms successful pairing.
4. The connection will be maintained as long as
the device remains on and within range.
After your sound processor has been paired to your
Bluetooth-enabled device, the sound processor will
automatically connect again when switched on. Your
sound processor can be paired to two Bluetooth-enabled
devices at a time. The paired sound processor can
be unpaired from the Bluetooth device by utilizing the
Bluetooth management menu of your device.
PLEASE NOTE: Once a sound processor has been
paired to a device it is recommended to keep paired
devices in silent mode to avoid dropouts related to
device notifications.
30