Operating Conditions; Transportation And Storage Conditions; Installation Requirements; Isolation Requirements - DePuy Synthes PUREVUE 242302 Mode D'emploi

Means of protection against
electric shock (acc . With EN/
IEC 60601-1)
Methods of Sterilization
Mode of Operation
8.5

Operating Conditions

Temperature
Relative humidity
8.6

Transportation and Storage Conditions

Atmospheric Pressure
Temperature
Relative humidity
CAUTION! Use original packaging materials during transportation to prevent damage
8.7

Installation Requirements

The Camera Control System must be connected only to a Supply Mains with protective earth .
WARNING! To avoid the risk of electric shock, this device must only be connected to a
Supply Mains with protective earth.
8.8

Isolation Requirements

Internal Isolation is provided from Supply Mains for the Camera Head .
Isolation from all poles of the Supply Mains can be achieved by switching off the Supply
Mains power switch on the back of the device (Figure 2, point 14)
8.9

Applied Parts

The Camera Control System does not contain applied parts .
Class I
Non-sterile device
Continuous
10 to 35°C (50°F to 95°F)
30 to 75%
500mbar to 1060mbar
-10 to 50°C (14°F to 122°F)
10 to 90%
56