Graef EURO 2200 Instructions D'utilisation page 46

Table des Matières

Publicité

Cleaning plan
Working steps
(1) Preparatory
(2) Dismounting of
the removable
parts
(3) Rough cleaning
(4) Cleaning
4.1 Dininfection -
additional measure
(5) Rinsing
(6) Checking
(7) Drying
(8) Care
(9) Assembly
(10) Safety
measures
The data refer to a single-shift operation.
The safety and product data sheets supplied with the detergents and disinfectants have to be observed
(1) P6 (phosphoric acid) - manufacturer: Henkel, Düsseldorf, Germany
Concentration:
Detergent
Process
close cutting thick-
ness;
pull the mains
plug
according to the
operating instructions
remove the
product remainders
manual
P3 topax 56
after thorough
RAN fat solvent
rinsing with water
Pril with disinfectant
(max. 40° Celsius)
( see point 1 )
reaction time
abt. 20 minutes
P3 alcodes
manual
(see point 2)
spray
drinking water
temperature
max. 40° Celsius
visually for optical
cleanliness
rub dry
dry in air
food oils
apply
with
spray
H1 approval
e.g. Henkel P3
service oil
in reverse sequence
to
disassembly
(operating instructions)
cover machine when
cleaning surrounding
area with spray guns
3% solution
!!! Important !!!
e.g. 20 litres = 300 ml P3 topax 56 (at 45° Celsius according to the instruc
tions of the manufacturer)
46
Observe the operating instructions
Cleaning unit
plastic scraper
plastic spatula
brush, tub,
cleaning cloth
hand spray
disposable cleaning
cloth, manual spray
disposable cleaning
cloth, hand spray,
water hose
disposable cleaning
cloth
disposable cleaning
cloth, manual spray
Observe mixture !
Note
start directly after
blade end, also
in case of
removable parts
all dismounted
and fixed
machine parts
see page 13
additional
protection;
spray distance
abt. 30 cm
other removed
machine parts,
see page 13 ff.
machine,
dismounted parts
rinse parts in contact
with product to be cut
prior to work
see page 15
staff needs clean
and disinfected
hands

Publicité

Table des Matières
loading

Table des Matières