Switching The Machine Off - Graef EURO 2200 Instructions D'utilisation

4.3 Cutting end pieces
* Pull the carriage back completely.
* Cut off knotted end.
* Place the product at the rear carriage wall in such a way that the original
cutting surface is located at the end piece holder plate.
* Lift the end piece holder and place it behind the end piece.
* Use the end piece holder to press the end piece against the stop plate.
* Place your thumb behind the thumb protection, and hold the grip with your
fingers only.
* Press the carriage forward and backward for cutting.
4.4

Switching the machine off

* Press the red off button.
* Turn the adjusting knob for the cutting thickness clockwise to top, beyond
- 0 - to cover the knife blade.
35
© Gebr.Graef Mai 2002
Technische Änderungen vorbehalten