Control Card Pcd Replacement - Hedson DRESTER GP 24 Manuel Technique

5. Control card PCD replacement

5.1 Components
5.2 Tools
T20
5mm
NOTE: Start instruction with chapter 1 safety precautions
1. Remove screws and lid.
2. Use the special tool to loosen the clips that hold the
circuit board to the aluminum profile.
3. Remove ALL cables for motors, heaters, sensors
etc. Ribbon cables released by pushing the pins
upwards like illustrated on picture. Mark cables for
reassembling.
4
x 11
1
EN
2
x 11
3
230756 rev 1