Using The Alert; Utility Menu - Radiation Alert Inspector + Manuel D'instructions

the timing period.

Using The Alert

The Alert can be set in mR/hr or cpm. Once the alert threshold is reached the
beeper will sound until the alert is deactivated, or the radiation level drops below
the set alert threshold.
1. To set the Alert, press the "SET" button on the end panel. The "ALERT" icon
(radiation symbol) and the "SET" icon are displayed.
2. Use the "+" and "-" buttons to adjust the display to the desired level.
3. Press the "Set" button once to retain the setting in memory. Then press it
again to turn the alert mode on. The "ALERT" icon is now displayed to
indicate the instrument is operating in the Alert mode.
4. To use the previous alert setting, press the set button twice. Now the alert
mode is on.
5. To deactivate the Alert mode, press the "Set" button again. The "ALERT" icon
is no longer displayed.

Utility Menu

The Utility Menu allows the user to change default settings for several operating
parameters. Once a setting is changed, it remains in effect unless they are
changed through the Utility Menu.
1. To activate the Utility Menu, hold down the "+" button while turning the
instrument on. The display will show the "MENU" icon. Release the "+" button
and a "1" indicating option 1 will appear along with the "Menu" icon.
2. Scroll through the menu by pushing the "+" or "-" buttons.
3. To select an option, push the "Set" button and the "SET" icon is displayed.
4. Use the "+" or "-" buttons to toggle between choices and press the "Set" button
to enter the new value. The instrument will continue to operate in the Utility
Menu mode, and the display will show "0" and "MENU". To adjust another
Utility Menu option, repeat the above steps.
14