Low Voltage Control Systems - Fantech FLEX 100H Manuel D'installation

Low Voltage Control Systems

* Please see instruction manuals for individual controls for proper wiring and set up of control systems.
CENTRAL CONTROLS
These control options can only be used individually
CONTROLS
ECO-Touch • Our most complete, yet easy to use control system
• Sleek design with backlight touchscreen LCD
• ECO mode selects the best operating mode and speed for
the season, minimizing energy use associated with ventilation
• Set preferred indoor relative humidity range and ventilation
mode for day and night conditions
• No battery to replace, all programmed settings are retained
during power outage
• Maintenance reminder indicator
• Error code messages reduce troubleshooting time
• MODE button provides 3 modes of operations: Ventilation
EDF1
, Recirculation and Standby
• User selected fan speed: Reduced, Medium, Normal and
20 minutes per hour
• AUTO setting allows the homeowner to deactivate the
dehumidistat
• When the humidity exceeds the desired setpoint, the
ventilation system operates at Normal speed.
• Once the desired humidity level is achieved, your ventila-
tion system resumes to its previous mode of operation
EDF1R • Press button once for continuous Reduced speed
• Press button twice and the unit will cycle 20 minutes ON/
40 minutes OFF and repeat
• EDF1 – Press button a third time and the system will run
continuously on HIGH speed
• EDF1R –Press button a third time and the system will run
recirculation on HIGH speed
AUXILIARY CONTROL – These controls can be paired
• 20- minute timer with LED light
RTS2*
• Boosts system to high speed with the touch of a button
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
• 20/40/60 minute timer with LED light
RTS5
• Boosts system to high speed with the touch of a button
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
MDEH1 • Rotary dial Dehumidistat
• Multiple units can be used
• We recommend setting the relative humidity above 80%
during the summer
FEATURES CONNECT TO
1. Ensure that unit is not
W
plugged when connecting
W
the control
2. Recirculation mode is only
available with the "R" suffix
at the end of the model
number.
W
W
The wiring connectors
W
W
+T
-T
*Maintain polarity
between control
and HRV
(+ → + ; - → -)
+T
-T
D
D
13
can be removed for
easier connection.
fantech