Whirlpool SDD 534 U Manuel D'instructions page 23

Once the cycle has started, the wash cycle led indicator light turns on. If the door is opened during the cycle, the program stops. Once
the door has been closed again, the program resets itself; to restart the cycle, press the
5.2 – OPERATING PHASES OF DIGIT MODELS
The control panel and the graphics shown in the manual
might show functions that are not provided on your machine.
To start the wash cycle, press the
Once the program has finished, the wash cycle led indicator light turns
off and the boiler led indicator light
Remove the rack
Actions and what happens
Activate the wall-switch, open the door and insert the overflow, close
the door.
Press the on/off button
filled into the boiler and into the tank.
When both the boiler and the tank are filled, the
yellow.
Load the basket.
LOADING THE DISHWASHER
Remove any solid leftovers from the plates (bones, peel, nuts etc);
leave the plates to soak in cold water if there are any stubborn
leftovers, such as dried cheese, egg etc.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket,
preferably with the handle at the bottom. Be careful not to injure
yourself on the fork prongs and knife blades.
When the machine is started up the first time at the beginning of the
day, wait for the resistances to heat the water contained in the boiler
and in the tank, for the
machine ready icon to appear.
cycle button.
cycle button
turns on.
, the selected cycle lights up, water is
key to light up green and for the
lights up
23