Declaration Of Incorporation - DITEC DAB305 Instructions D'origine

Declaration of incorporation

We
Entrematic Group AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
declare under our sole responsibility that the type of equipment:
Ditec DAB305
complies with the following directives:
2014/30/EU ElectroMagnetic Compatibility Directive (EMCD)
2006/42/EC Machinery Directive (MD) the following essential health and safety requirements:
1.1.2, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.7.2, 1.7.4, 1.7.4.1, 1.7.4.2. Technical documentation for
safe integration is provided.
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS)
Harmonized European standards which have been applied:
EN 60335-1:2012+A11:2014
EN 61000-6-2:2005
EN ISO 13849-1:2015
Other standards or technical specifications, which have been applied:
BBR
DIN 18263-4:1997
IEC 60335-2-103:2002 ed. 1/2011 ed. 2.1
EN 1634-1:2008
EC type examination or certificate issued by a notified or competent body (for full address, please contact Entrematic
Group AB) concerning the equipment:
C900020
The manufacturing process ensures the compliance of the equipment with the technical file. The manufacturing
process is regularly assessed by 3rd party.
The equipment must not be used until the final installed automatic door system has been declared in compliance
with the machinery directive 2006/42/EC.
The CE mark was first applied 2020-03-17.
Compilation of technical documentation applicable to the listed essential health and safety requirements:
Matteo Fino
Entrematic Group AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
Place Date
Landskrona 2020-03-16
1020517-DImulti-2.0
EN 60335-2-103:2015
EN 61000-6-3:2007+A1:2011
EN 16005:2012/AC:2015
BVL
IEC 60335-1:2010 ed. 5
EN 1158:1997+A1:2002+AC:2006
Email: matteo.fino@entrematic.com
Signature Position
Matteo Fino Entrance Automation President
Issue 2020-04-02
EI
DoI 1020516-en-1.0
13