TECHCON SYSTEMS TS6500CIM Manuel D'utilisation page 10

15 Fluid Level Magnet
16 Plunger Assembly
Flow Control; Main
17
Cylinder
Flow Control;
18
Injection Rod
Voltage Select
19
Switch
Power Input Socket
20
with Fuse Box
21 Air Filter
22 Wrench
23 Accessories Bracket
Cartridge Holder
24
Bracket
 Works with fluid level sensor
 Locks cartridge in place
 Applies steady pressure to prevent air entrapment
 Controls the speed of the main cylinder
 Rotate the flow control screw clockwise to increase
the speed.
 Rotate the flow control screw counterclockwise to
decrease the speed
 Controls the speed of the injection rod
 Rotate the flow control screw clockwise to increase
the speed.
 Rotate the flow control screw counterclockwise to
decrease the speed
 Select 115V or 230V
 Input power connection
 Provides air filtration
 Used to install the air filter assembly and drive
spindle assembly
 To hold wrench or other accessories
 To hold extra cartridge holder
10