Waring Commercial WFP7E Manuel D'utilisation page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 52
(batch bowl assembly continued)
• Place the cover on the bowl, with the feed tube to the left of the handle (at about 7-o'clock position).
The locking tabs on the back of the cover should be at the right of the locking tabs on the back rim
of the work bowl.
• Rotate the cover counterclockwise (anticlockwise) to lock it into place. When the cover is rotated
into place, the safety interlock tab on the front of the cover will fit snugly in the interlock mechanism
above the handle.

Neverattempttostartthefoodprocessor
withoutthecoverlockediNtopositioN.

Pushers and safety sleeve
Your Waring Food Processor is equipped with a safety sleeve with
built-in large pusher and locking mechanism. Note: Your food
processor will not operate unless the safety sleeve is locked into
place and the interlock mechanism is engaged. Pick up the sleeve
and large pusher. With the release tab facing the front of the food
processor, drop the pusher into the feed tube (the sleeve should
slide around the feed tube). Press firmly until the interlock
mechanism clicks into place. Your food processor is now ready
to operate.
Pusher use
Drop food to be processed down the small feed tube and use the
small pusher to guide the food into the work bowl. To lock the
small pusher into the large pusher, simply slide it into the small
feed tube and turn counterclockwise (anticlockwise) until the tab
locks into place.
You may also want to process food that does not fit in the small feed
tube. To do so, remove the sleeve and large pusher by pressing the
release tab that says "PRESS HERE". Add food to be processed
into the feed tube. Slide the white "LOCK" lever to the left. This
will allow the large pusher to move in and out of the safety sleeve.
Slip the sleeve back into place on the cover, making sure the
interlock mechanism is engaged. If using a processing disc, the food
will sit on the disc and push the pusher up into the extended position.
Make sure the small pusher is locked into the large pusher. Turn the
food processor on and push the large pusher down to guide food into
the processing disc.
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wfp7k

Table des Matières