Connecting Your Equipment; Aerial Connection - Pioneer X-HM70-S Mode D'emploi

Connecting your equipment

Connecting your equipment
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
Right
speaker
Video cable
TV
Wall socket
(AC 220 V to 240 V,
To video input
50 Hz)
socket

Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 ohms socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
8
En
AM loop
Installing the AM loop aerial
aerial
< Assembling >
ANTENNA
VIDEO LINE SUBWOOFER
L
R
OUT IN PREOUT
FM aerial
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for better
reception. When an external FM aerial is used, disconnect
the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM terminal. Position the
AM loop aerial for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand.
Left
speaker
SPEAKERS
AM
LOOP
FM
UNBAL
75 Ω
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
LAN ( 10/100 )
Note
• Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
X-HM70
provided
speaker wire
Red tube
Incorrect