Machine Operation (Scrubbing/Drying) - Nilfisk ALTO SCRUBTEC 653E Manuel D'utilisation

ENGLISH

MACHINE OPERATION (SCRUBBING/DRYING)

1. Start the machine as shown in the previous paragraph.
2. If necessary, press the solution fl ow control switches (54) as necessary, depending on the type of cleaning to be performed.
3. If necessary, turn the squeegee adjusting handwheel (23) so that the rear blade touches the fl oor along all its length.
4. If necessary, stop the machine and turn the adjusting handwheel (37); when turning it clockwise or counter-clockwise the
machine forward speed can be adjusted.
5. If necessary, stop the machine and turn the forward speed adjusting handwheel (38) as shown below:
• Turn it counter-clockwise to increase the forward speed;
• Turn it clockwise to decrease the forward speed.
NOTE
For correct scrubbing/drying of fl oors at the sides of the walls, Nilfi sk Alto suggests to go near the walls with the right side
of the machine as shown in fi gure 2.
CAUTION!
To avoid any damage to the fl oor surface, turn off the brushes/pad-holders when the machine stops in one
place.
12
USER MANUAL
A
SCRUBTEC 653E
Figure 2
B
9097060000(2)2009-10 A
P100106A