Unitron uMic Mode D'emploi page 16

Most probable cause
There is too much noise, I cannot understand the
speaker
Your hearing aid
microphones are set
too loud
The uMic rubs against
the wearer's clothing
The settings of your
hearing aids are not right
24
Remedy
Reduce the hearing aid
volume by pressing the
streamer ( ) key until you
reach a comfortable level.
Place the uMic closer to the
speakers mouth (20 cm, 8'').
Use the uMic ( ) button to
increase the uMic volume
Make sure the uMic is clipped
firmly. Clothing should not
cover the uMic
Please ask your hearing
healthcare professional to
fine tune your hearing aids
Most probable cause
uMic is no longer recognized by the streamer with
which it was previously paired
Two minutes after no
device was found, the
streamer stops seeking
devices to save power
The devices are too far
away from each other
uMic can be paired
to a maximum of four
different Bluetooth
devices. If the internal
memory is full, the fifth
pairing will delete the
first pairing
Pairing was never done,
or it was manually
deleted
The light indicator does not turn solid blue
uMic and the streamer
are not paired
Remedy
Switch the streamer off. Wait
until the red power indicator
turns off, then turn device on
again
Bring devices within 1 meter
range and try again
Repeat the pairing between
the devices
Repeat the pairing between
the devices
Repeat the pairing between
the devices
25