Déconnexion Du Périphérique Usb; Windows Xp Users - LaCie NETWORK SPACE Manuel D'utilisation

DÉCONNEXION DU PÉRIPHÉRIQUE USB
DISCONNECT THE USB CONNECTION
USB, FireWire, eSATA, and Thunderbolt external devices feature "plug & play" connectivity, which means that
your drive can be connected and disconnected while the computer is running. To prevent failures, however, it is
important to follow these steps when disconnecting your LaCie hard disk.

Windows XP Users

From the System Tray (located in the lower right-hand side of your screen), click the Eject icon (a small green
arrow over a hardware image). A message will appear, listing the devices the Eject icon controls (it should say,
"Safely remove..."). Click on the LaCie hard disk in this prompt.
This message will appear: "Safe to Remove Hardware" (or similar). It is now safe to disconnect the device.
Windows Vista & Windows 7 Users
From the System Tray (located in the lower right-hand side of your screen) click on the plug icon (note the white
check mark inside a green circle).
A message will appear, detailing the devices that may be safely unmounted.
Select Eject for the device you wish to unmount. A message will appear notifying you that it is safe to remove
the device.
Manuel d'utilisation des produits Network Space 119