Philips HD5416 Mode D'emploi page 7

Problem
The coffee is not hot enough.
There is less coffee in the jug than
expected.
The filter overflows while the appliance
is brewing coffee.
Solution
• Make sure that the jug is properly placed on the
hotplate.
• Make sure that the hotplate and the jug are clean.
• We advise you to brew more than three cups of coffee
to ensure that the coffee has the right temperature.
• We advise you to use thin cups, because they absorb less
heat from the coffee than thick cups.
• Do not use cold milk straight from the refrigerator.
• If your coffeemaker has an insulated jug, preheat
the insulated jug with hot tap water before you start
brewing coffee.
• Make sure you place the jug properly on the hotplate. If
the jug is not placed properly on the hotplate, the drip
stop prevents the coffee from flowing out of the filter.
• Check if you placed the filter into the appliance properly.
If the filter is not in the correct position, the drip stop
does not work, which may cause the filter to overflow.
• If you remove the jug from the appliance for more than
20 seconds during brewing, the filter starts to overflow.
English
9