Technical Data; Noise/Vibration Information - Bosch GSR Professional 14.4 V-Li Notice Originale

Technical Data

Cordless Drill/Driver
Article number
with battery
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Drill spindle thread
Weight according to EPTA-Procedure
01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
=2.3 m/s , Uncertainty K =1.5 m/s
a
h
Screwdriving: Vibration emission value
2
a =1.7 m/s , Uncertainty K =1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Bosch Power Tools
GSR 14,4 V-LI
Professional
3 601 ... J60 4..
"premium" "compact" "premium" "compact"
V=
-1
min 0 – 450
-1
min 0 – 1450
Nm 50/22
mm
mm
mm
mm 1.5 – 13
kg
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
2
,
Identify additional safety measures to protect
the operator from the effects of vibration such
2
.
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
J60 4..
14.4 14.4
0 – 450
0 – 1450
50/15
13 13
32 28
7 7
1.5 – 13
1/2" 1/2"
1.7 1.5
English | 19
GSR 18 V-LI
Professional
J60 3.. J60 3..
18 18
0 – 500 0 – 500
0 – 1600 0 – 1600
56/26 56/18
13 13
35 32
8
1.5 – 13 1.5 – 13
1/2" 1/2"
1.8 1.6
2 609 932 657 | (15.7.08)
8