Cisco Linksys WPSM54G Guide D'installation Rapide page 6

English : Print Server Installation
F.
Connect the Ethernet network
cable to your router and the
Ethernet port of the PrintServer.
(The Ethernet connection is for
configuration purposes only.
Later you can disconnect the
Ethernet network cable when
the PrintServer has connected
wirelessly.)
Click Next.
G.
Connect the power adapter to
the PrintServer and an electrical
outlet.
Click Next.
H.
Reconnect the printer's power
adapter to the electrical outlet.
Click Next.
I.
Wait a few moments while
the system searches for the
PrintServer.
4
Connect the Ethernet Network Cable to the
Router and PrintServer
Connect the Power Adapter to the
PrintServer and Electrical Outlet
Reconnect the Power to the Printer
Searching for the PrintServer
WPSM54G
Wireless-G PrintServer