Information Codes - Samsung NE58K9430 Série Manuel D'utilisation

DRAWER
Problem Possible cause
The drawer The drawer is out of
does not slide alignment.
smoothly or
drags.
The drawer is over-loaded or
the load is unbalanced.
Solution
Fully extend the drawer and
push it all the way in. See the
page 41.
Reduce weight. Redistribute
drawer contents.

Information codes

OVEN
Displayed
Possible cause
Code
This code occurs if the control
C-d0
key is short for 1 minute.
This code occurs if the door lock
C-d1
is mispositioned.
This code occurs if
communication between
C-F0
the Main and Sub PBA is
interrupted.
This code occurs if
communication between the
C-F2
Main and Touch is interrupted.
The oven sensor is open when
the oven is operating.
C-20
The oven sensor is short when
the oven is operating.
This code occurs if the internal
temperature rises abnormally
C-21
high.
The PCB sensor is open when
the oven is operating.
C-30
The PCB sensor is short when
the oven is operating.
This code occurs if the PCB
temperature rises abnormally
C-31
high.
Solution
Press OFF and restart the
oven. If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
Call for service
English 47