Galvamet KompaKTech Manuel D'emploi Et D'entretien page 143

EN
To optimize the operation, it is also recommended to dry all the inside of the hood, then
open the right flap (fig.5.9-X) to remove the grease filter in (fig.5.9-Y) by lifting it from
the knob (fig .5.9-W) and grease collector (fig.5.9-Z), lifting it from the knob (fig.5.9-K).
Fig. 5.9
After the above described action open the door on the left of the hood body (Fig. 5.10-X)
and wipe the whole interior thoroughly.
Fig. 5.10
67