Iii.4.B Executive Directions - Galvamet KompaKTech Manuel D'emploi Et D'entretien

EN
III.4.b EXECUTIVE DIRECTIONS
The base of the cabinet must be at least drilled as indicated in Fig. 3.30 and the back
removed in case.
Fig. 3.30
If the installation includes the optional plasma filtering kit the cut on the base can be
reduced as shown at Fig. 3.32
Fig. 3.32
Installation of the appliance imply a maximum length of the drawers that may be mounted
under the hob: (Fig.3.33)
 Drawers depth = 400mm about
Fig. 3.31
31