Makita DVC660 Manuel D'instruction page 8

Adjusting belts
The tightness of the shoulder belts, upper and lower
belts can be adjusted. Put your arms through the shoul-
der belts first then fasten the lower and upper belts.
To tighten, pull the end of the strap as illustrated. To
loosen, pull up the end of the fastener.
Lower belt
2
1
► 1. Strap 2. Fastener
Shoulder belts
► 1. Strap 2. Fastener
Upper belt
► 1. Strap 2. Fastener
1
2
2
1
Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
► 1. Carrying hook
Switch action
You can change the suction power in three steps: nor-
mal (1), high (2), and max (3).
To start vacuuming, press
change the suction power, press the button while the
vacuum cleaner is running. The suction power switches
in order normal (1) , high (2) , and max (3).
To turn off the vacuum cleaner, press
NOTE: When you start the vacuum cleaner again, it
will start in the same suction power as the previous
setting.
8 ENGLISH
1
button once. When you
button.