To Memorize Channels - JVC AV-24F704 Manuel D'instructions

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV chan-
nels. To use this TV with an antenna, set the TV/CATV
menu option to the TV setting. When shipped from the
factory, this menu option is in the CATV setting.
TV/CATV SELECTION
1
Press the MENU button.
2
Press the CH + (L) or – (M)
button until the indicator next to
" "
CH SETUP begins to flash,
then press the ENTER button.
3
Press the CH + (L) or – (M)
button until the indicator next to
" "
TV/CATV begins to flash.
4
Press the VOL + ( ) or – ( )
"
button to select the
" "
CATV mode. The arrow
indicates the selected mode.
5
Press the EXIT button.
NOTE: Contact your cable company to determine the
type of cable system used in your area.
14
MENU
CLOCK SET
ON/OFF TIMER
CH SETUP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
L / M / ENTER / MENU / EXIT
CH SETUP
TV CATV
AUTO CH MEMORY
ADD / DELETE
CH LABEL
"
TV or
L / M /
/
AUTOMATIC CHANNEL MEMORY
1
Press the MENU button.
2
Press the CH + (L) or – (M)
button until the indicator next to
"
CH SETUP
then press the ENTER button.
3
Press the CH + (L) or – (M)
button until the indicator next to
"
AUTO CH MEMORY
flash, then press the ENTER
button. The TV will begin
memorizing all the channels
available in your area.
4
Press the EXIT button.
TO ADD/DELETE CHANNELS
1
Press the MENU button.
2
Press the CH + (L) or – (M)
button until the indicator next to
/ MENU / EXIT
" CH SETUP
then press the ENTER button.
3
Press the CH + (L) or – (M)
button until the indicator next to
"
ADD/DELETE
then press the ENTER button.
4
Select the desired channels to
be added or deleted using the
10-key pad (0-9) or the CH + or
– button.
5
Press the VOL + ( ) or – ( ) button to select
"
DELETE
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press the VOL + ( ) or
– ( ) button if you wish to ADD the unmemorized
channel. The channel indicator will change from red to
green when a channel is added and the channel will
be memorized. If a memorized channel was selected
(step 4), the channel indication will be green.
Press the VOL + ( ) or – ( ) button if you wish to
DELETE the channel from
memory. The channel indicator
will change from green to red
when a channel is deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
6
Press the EXIT button after adding or deleting all of
the desired channels, to return to normal TV viewing.
"
begins to flash,
"
begins to
" begins to flash,
"
begins to flash,
"
.
MENU
CLOCK SET
ON/OFF TIMER
CH SETUP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
L / M / ENTER / MENU / EXIT
CH SETUP
TV CATV
AUTO CH MEMORY
ADD / DELETE
CH LABEL
L / M / ENTER / MENU / EXIT
MENU
CLOCK SET
ON/OFF TIMER
CH SETUP
PICTURE
AUDIO
LANGUAGE / IDIOMA / LANGUE
V-CHIP SET
L / M / ENTER / MENU / EXIT
CH SETUP
TV CATV
AUTO CH MEMORY
ADD / DELETE
CH LABEL
L / M / ENTER / MENU / EXIT
" "
ADD or
ADD CH 012
0-9 / L / M /
/ / MENU / EXIT