SLEEP TIMER button
The Sleep Timer can turn the TV off for you after you fall
asleep. Program it to work in intervals of 10 minutes, for
a total time of up to 120 minutes.
VCR buttons
You can use this remote control to operate the basic
functions of your VCR. These functions include: play,
record, rewind, fast-forward, stop, pause, channel scan,
TV /VCR, power on, and power off.
DVD buttons
You can also use this remote control to operate the basic
functions of your DVD player. These functions include
play, rewind, fast-forward, stop, still/pause, previous/
next, tray open/close, power on, and power off.
TV/CATV switch
Use either the television's own tuner or a cable box to
select channels. Set this switch to TV to operate the
television's built-in tuner.
VCR/DVD switch
You can control a VCR or DVD player with the buttons
on the lower part of the remote control.
22
• To change the sleep timer setting:
Press the SLEEP TIMER button repeatedly until the
display turns to desired time.
• To cancel the sleep time:
SLEEP
120
Press the SLEEP TIMER button repeatedly until the
display turns to 0.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control
JVC-brand VCR's. For any other manufacturer's brand
VCR, please see the code chart and instructions on
page 9.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control
JVC-brand DVD players. For any other manufacturer's
brand DVD player, please see the code chart and
instructions on page 10.
Move the switch to CATV to operate a cable box.
• See page 8 for information on programming your
remote for cable box operation.
Use the VCR/DVD selector switch to choose either VCR
or DVD operation.
• See pages 9 and 10 for information on programming
your remote with VCR and DVD operating codes.