➍ Specifications - Elmo MX-1 CONNECT BOX Manuel D'instructions

Masquer les pouces Voir aussi pour MX-1 CONNECT BOX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4K image cannot be
displayed.
The image is striped.
There is a distortion of the
image.
About long-term usage of this product
Due to the lifetime of its parts, if the product is used for longer than the warranty period,
its performance and quality may deteriorate. In this case, we will replace the parts for
a charge. Consult the dealer from whom you purchased the product or our nearest
branch/office.
➍ SPECIFICATIONS
Item
Power source
Power consumption
Outside dimensions
Weight
Output terminal
Input terminal
・ 4K image can only be output from a computer connected
via the USB. The computer needs to be able to output 4K
image. Install Image Mate 4 (which supports the MX-1) to
such computer and use it to view 4K image.
・ This may be interference fringes between dots of printed
matter and TV scanning lines or CMOS pixels. Changing
the shooting range of the MX-1 may improve the
problem.
・ Vertical stripes may appear on the LCD projector screen.
This phenomenon can be mitigated by adjusting the dot
clock manually from the projector.
・ The image may be distorted when shooting a monitor
screen with the MX-1 while the live image feed is
displayed.
・ The shooting environment is too dark. Adjusting the
brightness in the Brightness adjustment mode may
improve the problem.
・ Reducing the resolution of the MX-1 may improve the
distortion of the image.
DC5V (AC adapter AC100 ~ 240V)
4.6W(MX-1 with MX-1 CONNECT BOX connected)
D 64.2(61.1 when projecting parts are excluded) × W 92.2 × H 23
[mm]
Approx. 75g (Main body only)
RGB Out Mini Dsub 15P connector female × 1
HDMI Out TypeA Standard terminal × 1
19P In-Out terminal for connecting the MX-1 × 1
25
Specifications

Publicité

Table des Matières
loading

Table des Matières