➋ Connecting The Mx-1 Connect Box - Elmo MX-1 CONNECT BOX Manuel D'instructions

➋ CONNECTING THE MX-1 CONNECT BOX
FRONT
Mark
Resolution/Output
①
mode selection
Port for the
②
Expansion cable
③
Flicker correction
REAR
Mark
①
②
③
Function
To change the resolution and output mode.
When connecting RGB only：XGA⇔UXGA
When connecting HDMI：Full⇔Normal
To connect to the MX-1 via the Expansion cable for
the MX-1.（Expansion cable for MX-1 is included.）
Select the same value as used for the power supply
frequency.(50Hz / 60Hz)
※The setting set by the slide switch has the priority over the
setting set by the MX-1.
To connect the supplied DC power cable.
To output digital images by connecting to a monitor via the HDMI
cable. (The HDMI cable is not included.)
To output RGB images by connecting to a monitor via the RGB
cable. (The RGB cable is not included.)
21
Description
Description
日
本
語