Denon DN-V1700 Mode D'emploi page 34

ENGLISH
• OSD display on/off control using the OSD/TIME SET button on the main unit
Only the display of the status display can be turned on and off using the front panel's OSD/TIME SET button.
Display of the status display turns on and off each time the key is pressed. The display time is the value set with the "DS" serial
command. The default value is 3 seconds.
When turned on, "ON" is displayed on the screen.
Nothing is displayed when the status OSD is switched to off.
• Status display
The status display indicates the status with respect to operation of the main unit keys and operation from the parallel remote
controller. The status display has priority over the user OSD display.
The status of the play mode, etc., is displayed at the upper left, while the file name and other supplementary information is
displayed at the upper right.
The status is only displayed the number of seconds specified with the "DS" serial command, after which it turns off
automatically.
Key (main unit, parallel remote)
PLAY/PAUSE
STOP
SELECT
STOP (SHIFT) + SELECT
FWD SKIP (9)
REV SKIP (8)
REPEAT (SHIFT + 9)
SINGLE (SHIFT + 8)
Invalid key operation
34
OSD
STATUS
Status display
In play mode PLAY
In pause mode PAUSE
STOP
DIR
DRV
In stop mode SEARCH
In play mode 9
In stop mode SEARCH
In play mode 8
REPEAT
SINGLE
ON
INFOMATION
Information display
Name of playing file
None
None
Name of destination directory
(VIDEO, AUDIO, PICTURE or SCRIPT)
Name of new drive (PCC or HDD)
Clip no. (1 to 999)
No. of playing clip (1 to 999)
Clip no. (1 to 999)
No. of playing clip (1 to 999)
ON/OFF
ON/OFF
!