Denon DN-V1700 Mode D'emploi page 27

• List of file operation commands
(a: Issuing in stop mode, b: Issuing during file playback, c: Issuing in still and pause modes,
d: Issuing during script playback, e: Issuing as FTP "SITE" command)
Command name
28 File copy
29 File delete
30 Format drive
• List of setting commands
(a: Issuing in stop mode, b: Issuing during file playback, c: Issuing in still and pause modes,
d: Issuing during script playback, e: Issuing as FTP "SITE" command)
Command name
31 Sorting order setting
32 Time code setting in slave mode
33 IP address setting
34 Gateway address setting
35 Subnet mask setting
36 Startup screen display setting
37 VITC time setting
38 Key lock
39 Real time clock setting
40 Single mode setting
41 Repeat mode setting
42 Flash ROM update
43 FTP "SITE" command lock
44 FTP log-in ID setting
45 FTP log-in password setting
46 SNTP server setting
47 SNTP time setting
48 Reboot
49 Still display setting
50 Time difference setting
NOTE:
Never turn the power off while the flash ROM update "2FU" is being executed. The "2FU" command rewrites the internal
program memory. Turning the power off while this is being executed may damage the set.
• List of script debug commands
(a: Issuing in stop mode, b: Issuing during file playback, c: Issuing in still and pause modes,
d: Issuing during script playback, e: Issuing as FTP "SITE" command)
Command name
51 Debug mode setting
52 Execute one line of script
53 Execute script from specific line on
Command
"s" CP Copy files between drives
"s" DL Delete file
nFM Format drive
Command
nFS Set file sorting order
nTM Time code setting in slave mode
"s" IP IP address setting
"s" GW Gateway address setting
"s" NM Subnet mask setting
nBS Turn startup screen display on and off
"s" TC VITC time setting
nKL Turn key lock function on and off
"s" RC Real time clock setting
nSG Turn single mode on and off
nRP Turn repeat mode on and off
2FU Update flash ROM
nLL FTP "SITE" command lock
"s" ID FTP log-in ID setting
"s" PW FTP log-in password setting
"s" NS SNTP server address setting
NT Setting of time by SNTP server
nRB Restart system
nFI Still display setting (frame/field)
"s" GT Time difference and daylight savings setting
Command
"s" DM Debug mode setting
nSJ Execute one line of script
nLG Execute script from specific line on
Function a
C
C
C
Function a
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Function a
C
C
C
ENGLISH
b c d e
C
C
b c d e
C
C
C C C
C C C
C C C
C C C
C C C
C
C C
C
C
C C
C
b c d e
C
C
C
27