Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

5 PREPARATIONS

2 Checking the accessories
Check that all the accessories are included, referring to the
section "Accessories".
2 Mounting on the rack
The DN-V1700 uses a rack-mount chassis (1U).
Use the included rack mount fittings as shown below to
mount the DN-V1700 on a 1U type rack mount rack.
2 Mounting the feet
Set the feet in the holes in the bottom of the set and push them at the center to insert them fully.
The feet are press-fitted into the set, so they cannot be removed once mounted.
12
NOTE:
When mounting the DN-V1700 on the rack, be sure to use
guide rails or shelf boards, etc., on the rack side to prevent
weight from being applied to the front of the DN-V1700.
The weight of the DN-V1700 cannot be supported only
with the fittings.
Also take sufficient considerations for the installation
environment, for example with respect to heat from other
devices (use forced ventilation, etc.).

Publicité

Table des Matières
loading

Table des Matières