Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSR Professional 14,4 V-LI Notice Originale

OBJ_BUCH-565-008.book Page 14 Friday, September 30, 2016 10:07 AM
14 | English
11 Battery charge-control indicator*
12 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving
application according to ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Drill spindle thread
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation and during storage
Recommended batteries
Recommended chargers
*depending on the battery pack being used
** limited performance at temperatures <0 °C
***
only for wireless charging batteries

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =2.5 m/s , K =1.5 m/s
h
2
Screwdriving: a =1.5 m/s , K =1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
1 609 92A 2D5 | (30.9.16)
3 601 ...
V=
-1
min
-1
min
Nm
mm
mm
mm
mm
kg
°C
°C
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
2
,
sories, keep the hands warm, organisation of work patterns.
2
.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2,
EN 50581.
GSR 14,4 V-LI GSR 18 V-LI
H60 4.. H60 3..
14.4
0 – 450 0 – 500
0 – 1450 0 – 1600
50/22* 56/26*
13
32
7
1.5 – 13 1.5 – 13
1/2" 1/2"
1.6 – 1.9* 1.7 – 2.2*
0...+45 0...+45
-20...+50 -20...+50
GBA 18V..
GBA 14,4V... GBA 18V... W
AL 18..
GAL 3680
AL 18.. GAL 18V... W***
Bosch Power Tools
18
13
35
8