Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2-WIRE VIDEODOOR ENTRY SYSTEM MONITOR
ENG-21
Calls from the entrance panel have priority over the automatic switch-on system. If, while
automatic switch-on is taking place, a call is made to another monitor from the entrance
panel, the video of your monitor will be disconnected; your monitor will automatically go into
standby, thereby protecting the privacy of the call.
For building with several points of entry, hold down the automatic switch-on button
for 2
seconds each time you wish to cycle through the videos from one entrance panel to the next.
Long push
Long push
Panel 1
> 2 seg.
> 2 seg.
Panel 3
Panel 2
Short push
< 1 seg.
RECORDING IMAGES
The monitor has enough memory to store up to 30 images.
Manual recording of one or several images
When the image you want to record appears on the screen, press the MENU button
O K
(multifunction button
), then press
(multifunction button
). The recording will then be
made and stored in memory with the time and date that it took place. You can record several
images during the same conversation (see page 27).
Automatic recording of missed calls
Whenever a call is received, the main monitor automatically captures an image. If a call goes
unanswered, once the time allowed for answering has expired the image is stored, along with
the time and date it was captured, in the memory of the main monitor.
The main monitor notifi es you that there are recordings which you have not yet seen by
blinking the status LED (5).
Deleting saved images
When the memory is full, the monitor automatically deletes the oldest recordings so as
to make space for new ones. It is also possible, however, to delete unwanted recordings
manually while you are viewing them (see page 22).
Publicité
Table des Matières
