Operation; Main Display - Cameo OTOS H5 Manuel D'utilisation

OPERATION

NOTES
As soon as the spotlight is correctly connected to the mains supply, "Welcome to Cameo", the
model name and the software version will be displayed in succession during the start process and
motor reset. After this process, the spotlight is ready for operation and the previously activated
operating mode is launched.
The main display is activated automatically if no input is made within approximately 30 seconds.
In the event of a technical fault, the lamp is switched off, the display shows "Lamp Protected"
and the warning triangle symbol appears in the bottom right-hand corner.

MAIN DISPLAY

The main display shows different information relevant to the various operating modes.
DMX and W-DMX operating modes
Temperature of the device head
Lamp status
Slave operating mode
Temperature of the device head
Lamp status
W-DMX status
Warning
DMX start address
and DMX mode
W-DMX status
Warning
Operating mode
15